Product Description

Providing unlimited possibilities for all divers, this versatile state-of-the-art Finn Light Short 1400 Smart features smart electronics to give you 3 operating modes and a battery capacity alert.


·      3x high efficiency single LED

·      1400 lm

·      10° focus beam

·      Clear spot for effective signaling

·      Smart electronics

·      3 modes of operation – 1400lm / 700 lm / 100 lm

·      Li-Ion accumulator

·      Accumulator capacity check on start up

·      Running time – 2,5 h on full power (1400 lm), 4,5 h in 700 lm, 24 h in 100 lm

·      Low accumulator capacity alert

·      Discharging and overcharging protection

·      Resistant aluminum alloy body

·      Borosilicate glass

·      Anatomic Goodman handle

·      Operational depth up to -200 m (655 ft)

·      Weight on surface 671 g (23,5 oz) – including handle

·      Weight under water 245 g (8,6 oz)


Source of light

LED is the most effective source of light which is why the Short 1400 Smart three powered diodes Cree XP-G providing 1400 lm are used. Guaranteeing 10, 000 hours of continuous 6300 K cold white light. This dive light has exceptionally effective optics that concentrate the light in a 10˚ beam where it is 43 times stronger.


The innovative features are brought to the user via the Smart electronics incorporated in the torch. Upon start-up the lamp will pass the battery test to give you information about the capacity of the accumulator. With this information, the diver can then choose which mode to use for the dive. 1400 lm full intensity will run for 2.5 hours. 700 lm half intensity will run for 4.5 hours. 100 lm safe mode will run for up to 24 hours and this mode can be used at the surface when preparing kit or in dry caves for instance.

The low capacity alert will be activated when 60% of the capacity has been used. The light will blink periodically once a minute to letv you know that you only have 40% left. You can, however, get two times longer operating time by switching to a lower mode.

This dive light is equipped with overheating protection. The featured smart electronics protect the lamp against any heat damage and also protects the user against the consequence of accidental switching on out of the water. The lamp is manipulated with the magnetic ring on the head.

Li-Ion technology

Li-Ion batteries are the perfect source of energy suited for LED’s. This dive torch is protected against over charging and deep discharge. Meaning you can leave the torch on overnight without any worries of damage to the batteries.

Material and construction

Switching is now much easier! All you have to do is turn the magnetic head in any direction to turn the light on, eliminating the frustration of having to look for any small buttons in the dark. This lamp is intended for use in extreme conditions with a combination of heavy-duty aluminum alloy and delrin® covered with a hard eloxal coating.

Safety first

All Finn Lights comply with the qualifications of European Standards and also posses all of the important CE Certificates.